CBTRB - 39-80055-030, PART B
- MSDS: CBTRB
- Manufacturer: SYON CORP
- Product Name: 39-80055-030, PART B
- National Stock Number: 8040-00-776-9601
Product Identification
Product ID:39-80055-030, PART B
MSDS Date:01/01/1993
FSC:8040
NIIN:00-776-9601
Kit Part:Y
MSDS Number: CBTRB
Responsible Party
ASHLAND, MA 01721
US
Emergency Phone: 508-881-8852
Info Phone: 508-881-8852
Cage: 0SJM5
Contractor
Telephone: 508-881-8852
Cage: 0SJM5
Ingredients
POLYAMIDE RESIN (100% IRRITANT SKIN/EYE)
CAS: 68410-23-1
RTECS: IE1225000
Fraction By Weight: 1%
ACGIH TLV: 1 PPM
Hazards
Routes of Entry: Inhalation:UNKNOWN Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:CAUSES SEVERE EYE AND SKIN IRRITATION
OR BURNS. MAY BE HARMFUL IF SWALLOWED.
First Aid
First Aid:GET MEDICAL ATTENTION IMMEDIATELY. SKIN OR EYE CONTACT:
REMOVE CONTAMINATED CLOTHING. FLUSH SKIN OR EYES WITH PLENTY OF
WATER FOR 15 MINUTES. INGESTION: DO NOT INDUCE VOMITING UNTIL AFTER
CONSULTING A PHYSICIAN. IF CONSCIOUS--DILUTE WITH MILK OR WATER.
Fire Fighting
Flash Point Method:COC
Flash Point:>500F,>260C
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS AND
FULL PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:WEAR APPROPRIATE PROTECTIVE CLOTHING AND
RESPIRATOR. SCOOP UP EXCESS AND REMOVE. RESIDUAL CAN BE REMOVE WITH
NONFLAMMABLE SOLVENT.
Exposure Controls
Respiratory Protection:NIOSH APPROVED ORGANIC VAPOR RESPIRATOR.
Ventilation:LOCAL & MECHANICAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SPLASH-PROOF GOGGLES.
Other Protective Equipment:SAFETY SHOWER AND EYE WASH FACILITIES.
Supplemental Safety and Health
KEY1:C4.
Chemical Properties
HCC:B3
Boiling Pt:B.P. Text:NA
Melt/Freeze Pt:M.P/F.P Text:NA
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:0.97
Evaporation Rate & Reference:NA
Solubility in Water:NIL
Appearance and Odor:VISCOUS AMBER LIQUID.
Percent Volatiles by Volume:NONE
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:STORAGE AT ELEVATED TEMPERATURES OVER LONG
PERIODS OF TIME.
Hazardous Decomposition Products:CO, ALDEHYDES AND ACIDS.
Conditions to Avoid Polymerization:EXCESSIVE EXOTHERMS WHEN CURED.
Disposal
Waste Disposal Methods:INCINERATE IN ACCORDANCE WITH LOCAL POLLUTION
REGULATIONS AND ORDINANCES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.